Acer X1270 Series User Manual

Also see for X111 Series: Operation guide User manual User manual User guide User manual

Acer X1270 Series User Manual Manual pdf 21 page image

11EnglishTurning the projector off1 To turn the projector off, press the power button. This message appears:"Please press the power button again to complete the shutdown process."Press the power button again.2 The LED power indicator will turn RED and blink rapidly after the projectoris turned off, and the fan(s) will continue to operate for about 2 minutes toensure that the system cools properly. (only supported under "InstantResume" mode)3 As long as the power cord remains plugged in, you can press the powerbutton to turn the projector immediately back on anytime during the 2-minute shutdown process. (only supported under "Instant Resume" mode)4 Once the system has finished cooling, the LED power indicator will stopblinking and turn solid red to indicate standby mode.5 It is now safe to unplug the power cord.Warning indicators:• "Projector Overheated. Lamp will automatically turn off soon."This onscreen message indicates that the projector has overheated.The lamp with automatically turn off, the projector will automaticallyshut down, and the LED temp indicator will turn solid red. Contactyour local dealer or service center.• "Fan failed. Lamp will automatically turn off soon."This onscreen message indicates that the fan has failed. The lamp willautomatically turn off, the projector will automatically shut down,and the LED temp indicator will blink. Contact your local dealer orservice center.Note: Whenever the projector automatically shuts down and theLED lamp indicator turns solid red, contact your local reseller orservice center.