Acer Veriton 7600G Service Manual

Also see for Veriton 3600: Service guide

Contents

Acer Veriton 7600G Service Manual Manual pdf 103 page image

Veriton 3600(D/G)/5600(D/G)/7600(D/G) 94Removing the Power Supply1. See “Removing the Housing Cover” on page 852. See “Removing a Dummy Link Bar” on page 863. See “Removing a Link Bar” on page 864. Disconnect the FDD power connector from the FDD drive and the HDD power connector from the HDD..5. Disconnect the CD-RW power connector from CD-RW drive and DVD-ROM power connector from DVD-ROM drive.6. Disconnect the main power connector and 12 Volt. power connector from the main board. Remove thefour screws that hold the power supply to the housing and detach the power supply from the housing.Removing the Intrusion Alarm Cable Module1. See “Removing the Housing Cover” on page 852. Disconnect the cable as shown here, remove the one screw here, and then detach the intrusion alarmcable module from the housing.Removing the LED Activity Indicators Module1. See “Removing the Housing Cover” on page 852. Press the LED activity indicators module to release the latches in the direction as shown here, and thendetach the module from the housing.