Chapter 1 23Hardware Specifications and ConfigurationsNOTE: The BIOS can be overwritten/upgraded using the FLASH utility (AWDFLASH.EXE).ProcessorItem SpecificationType Intel® Pentium IV FC-PGA2 processors with mPGA478 packageSlot Socket mPGA478Speed Internal: 1.4~2.4GHz+External: 400/533MHz Data Bus Frequency for Brookdale-G and 400 MHz forBrookdale-GL.Minimum operating speed 0 MHz (If Stop CPU Clock in Sleep State the BIOS Setup is set to Enabled.)Voltage Processor voltage can be detected by the system without setting any jumper.BIOSItem SpecificationBIOS code programmer AwardBIOS version V6.0BIOS ROM type Intel FWH SST 49LF004-33-4C-NHBIOS ROM size 4MBSupport protocol PCI 2.1, APM1.2, DMI 2.00.1, E-IDE, ACPI 1.0, ESCD 1.03, ANSI ATA 3.0, PnP1a, Bootable CD-ROM 1.0, ATAPIBoot from CD-ROM feature YesSupport to LS-120 drive NoSupport to BIOS boot block feature YesBIOS Hotkey ListHotkey Function Descriptioncccc Enter BIOS Setup Utility Press while the system is booting to enter BIOSSetup Utility.aaaa+ oooo Enable hidden page of BIOS Setup Utility Press in BIOS Setup Utility main menu screen,the Advanced Options menu then appears.The items on the Advanced Options menu are:Memory/Cache OptionsPnP/PCI OptionsChips Options
