Chapter 4 63Use the following procedure as a guide for computer problems.NOTE: The diagnostic tests are intended to test this model. Non-Acer products, prototype cards, or modifiedoptions can give false errors and invalid system responses.1. Duplicate symptom and obtain the failing symptoms in as much detail as possible.2. Distinguish symptom. Verify the symptoms by attempting to re-create the failure by running the diagnostictest or by repeating the same operation.3. Disassemble and assemble the unit without any power sources.4. If any problem occurs, you can perform visual inspection before you fellow this chapter’s instructions. Youcan check the following:power cords are properly connected and secured;there are no obvious shorts or opens;there are no obviously burned or heated components;all components appear normal.5. Use the following table with the verified symptom to determine which page to go to.Symptoms (Verified) Go ToPower failure. (The power indicator does not goon or stay on.)“Power System Check” on page 65.POST does not complete. No beep or errorcodes are indicated.“Power-On Self-Test (POST) Error Message” onpage 67“Undetermined Problems” on page 79POST detects an error and displayed messageson screen.“Error Message List” on page 68Other symptoms (i.e. LCD display problems orothers).“Power-On Self-Test (POST) Error Message” onpage 67Symptoms cannot be re-created (intermittentproblems).Use the customer-reported symptoms and go to“Power-On Self-Test (POST) Error Message” onpage 67“Intermittent Problems” on page 78“Undetermined Problems” on page 79TroubleshootingChapter 4