Acer TravelMate 4400 User Manual

Also see for TravelMate 4400: Guía del usuario Service guide Manuel d'utilisation Manual do utilizador

Contents

Acer TravelMate 4400 User Manual Manual pdf 46 page image

38English Enable disk-to-disk recoveryTo enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,then select Main from the categories listed at the top of the screen. Find D2DRecovery at the bottom of the screen and use the and keys to set thisvalue to Enabled.PasswordTo set a password on boot, activate the BIOS utility, then select Security fromthe categories listed at the top of the screen. Find Password on boot: and usethe and keys to enable this feature.Using softwarePlaying DVD moviesWhen the DVD drive module is installed in the optical drive bay, you can playDVD movies on your computer.1 Eject the DVD tray and insert a DVD movie disk; then close the DVD tray.Important! When you launch the DVD player for the first time, theprogram asks you to enter the region code. DVD disks are dividedinto 6 regions. Once your DVD drive is set to a region code, it willplay DVD disks of that region only. You can set the region code amaximum of five times (including the first time), after which thelast region code set will remain permanent. Recovering your harddisk does not reset the number of times the region code has beenset. Refer to the table below for DVD movie region codeinformation.2 The DVD movie will automatically play after a few seconds.Region code Country or region1 USA, Canada2 Europe, Middle East, South Africa, Japan3 Southeast Asia, Taiwan, South Korea4 Latin America, Australia, New Zealand5 Former USSR, parts of Africa, India6 People's Republic of China