Acer TravelMate 4060 User Manual

Also see for TravelMate 4060: Service guide Guía del usuario Manuel d'utilisation Manual do utilizador

Contents

Acer TravelMate 4060 User Manual Manual pdf 52 page image

42English 4 In the Acer eRecovery window, select Recovery settings and click Next.5 In the Recovery settings window, select Burn image to disk and click Next.6 In the Burn image to disk window, select 01. Factory default image andclick Next.7 Follow the instructions on screen to complete the process.Re-install bundled software without CDAcer eRecovery stores pre-loaded software internally for easy driver andapplication re-installation.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery actions and click Next.5 In the Recovery settings window, select Reinstall applications/drivers andclick Next.6 Select the desired driver/application and follow the instructions on screento re-install.At first launch, Acer eRecovery prepares all the needed software and may takefew seconds to bring up the software content window.Change passwordAcer eRecovery and Acer disk-to-disk recovery are protected by a password thatcan be changed by the user. Follow the steps below to change the password inAcer eRecovery.1 Boot to Windows XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery settings and click Next.5 In the Recovery settings window, select Password: Change Acer eRecoverypassword and click Next.6 Follow the instructions on screen to complete the process.Note: If the system crashes, and will not boot to Windows, you canrun Acer disk-to-disk recovery to restore the factory default imageunder DOS mode.