Acer S211HL Quick Start Manual

Also see for S211HL: User guide

Acer S211HL Quick Start Manual Manual pdf 1 page image

EnglishImportant safety instructionsPlease read the following instructions carefully.1•• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2can severely damage it.3display.4 Do not remove the cover or attempt to service this unit yourself. An authorized technician shouldperform servicing of any nature.5monitor outside this range may result in permanent damage.6 Immediately unplug your monitor and call an authorized technician if any of the followingcircumstances occur:• Monitor-to-PC signal cable is frayed or damaged.••Package contentsAttaching the monitor to the base1 Remove the monitor base from the packaging and place it on a stable and level workspace.2 Remove the monitor from the packaging.3 Attach the the monitor stand arm to the base.• Ensure that the base is locked onto the monitor stand arm. (for selected models)• Secure the base to the monitor stand arm by turning the white screw using the integrated tabor a suitable coin. (for selected models)Connecting your monitor to a computer2Plug the power cords of your computer and your monitor intoa nearby electrical outlet.External controlsIcon Item DescriptionPower button/indicatorTurns the monitor on/off. indicates power on. Amberindicates standby/power saving mode.Minus / Plus If the OSD is active, press the Minus or Plus buttons to togglebetween the OSD options.OSD functions Press to view the OSD. Press again to enter a selection in the OSD.Auto adjustbutton/ExitPress the Empowering Key to open the Acer eColor ManagementOSD and access the scenario modes./monitor AC Power cable VGA cable HDMI cable User Quick startguides guideIf the OSD is active, press Auto to exit the OSD. Once the OSD isinactive, press Auto and the monitor will automatically optimizethe display position, focus, and clock of your display.Empowering KeyAC Adapter34Acer LCD Monitor Quick Start Guide (QSG)To clean the LCD monitor screen:Turn off the LCD monitor and unplug the power cord.Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlightDo not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to theStore the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCDLiquid spills onto the LCD monitor or the monitor is exposed to rain.The LCD monitor or case is damaged.LCDBlueConnect one end of the adapter to the monitor and the other end toa properly grounded, AC outlet.(Optional)HDMIDC IN2HDMIDVID-SubDCD-SubDVIDVI cable(Optional)Connect the signal cable to the VGA and/or DVI-D (optional) and/orHDMI (optional) input socket of the monitor, and the VGA and/or DVI-D(optional) and/or HDMI (optional) output socket of the graphics card onthe computer. Then tighten the thumbscrews on the signal cableconnector.

/ 2

Related manuals for Acer S211HL