11EnglishAdjusting the Projected ImageAdjusting the Height of the Projected ImageThe projector is equipped with an elevator foot for adjusting the image height.To raise the image:1 Press the elevator button.2 Raise the image to the desired height angle, then release the buttonto lock the elevator foot into position.3 Use Tilt adjusting wheel to fine-tune the display angle.To lower the image:1 Press the elevator button.2 Lower the image to the desired height angle, then release the buttonto lock the elevator foot into position.3 Use Tilt adjusting wheel to fine-tune the display angle.3 21Tilt adjusting wheelElevatorbuttonElevator footDownloaded From projector-manual.com Acer Manuals