Acer PE-S42 Series User Manual

Also see for Power Series: Service guide Quick guide User guide User guide User guide

Acer PE-S42 Series User Manual Manual pdf 37 page image

27EnglishImageProjection• Front-Desktop: The factory default setting.• Rear-Desktop: When you select this function, the projectorreverses the image so you can project from behind a translucentscreen.• Rear-Ceiling: When you select this function, the projectorreverses and inverts the image at same time. You can project frombehind a translucent screen with ceiling mounted projection.• Front-Ceiling: When you select this function, the projectorinverts the image for ceiling-mounted projection.Projection Mode• Front: The factory default setting.• Rear: Reverses the image so you can project from behind atranslucent screen.Projection Location• Auto: Automatically adjusts projection location of image.• Desktop• Ceiling: Turns the image upside down for ceiling-mountedprojection.Aspect Ratio Use this function to choose your desired aspect ratio.• Auto: Keep the image with original width-higth ratio and maximize the image to fit native horizontal or vertical pixels.• Full: Resize image to fit full screen by width (1280 pixels) andheight (800 pixels).• 4:3: The image will be scaled to fit the screen and displayed usinga 4:3 ratio.• 16:9: The image will be scaled to fit the width of the screen andthe height adjusted to display the image using a 16:9 ratio.• L.Box: Keep original signal aspect ratio and zoom in by 1.333times.Auto Keystone Automatically adjusts vertical image.Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone function is unavailable under AutoKeystone setting to "On".Sharpeness Adjusts the sharpness of the image.• Press to decrease the sharpness.• Press to increase the sharpness.Downloaded From projector-manual.com Acer Manuals