Acer PD525 Series User Manual

Also see for PD523 Series: Specifications User guide Manual

Acer PD525 Series User Manual Manual pdf 51 page image

9 ... EnglishAppendicesReplacing the lampThe projector will detect the lamp life itself. It will show you awarning message “Lamp is approaching the end of its usefullife in full power operation. Replacement Suggested!” Whenyou see this message, changing the lamp as soon as possible.Make sure the projector has been cooled down for at least 30minutes before changing the lamp.Warning:Lamp compart-ment is hot! Allowit to cool downbefore changinglamp!Warning: Toreduce the risk ofpersonal injury, donot drop the lampmodule or touchthe lamp bulb. Thebulb may shatterand cause injury ifit is dropped.Lamp Changing Procedure:1. Turn the power off the projector by pressing the Powerbutton.2. Allow the projector to cool down at least 30 minutes.3. Disconnect the power cord.4. Use a screwdriver to remove the screw from the cover.5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module.7. Pull out the lamp module. To replace the lamp module, reverse the previous steps.1 342