Acer HDS AMS200 Reference Manual

Acer HDS AMS200 Reference Manual Manual pdf 169 page image

Acer | HDS AMS200 User and Reference Guide 149(NAS)To confirm the latest progress rate, refresh the display by clicking Refresh.3. Normal displays in the Status box. (When the formatting is in execution, the progressstatus displays.)If formatting is terminated abnormally, review the results.The formatted logical information is updated and the window displays.Table 7.2 Formatting MessageDisplayed Action to be Taken02-xxxx, 03-xxxx, 04-xxxx or 0B-xxxx For the above code, a hardware fault is assumed. If the fault is not recoveredafter re-execution, contact Acer | HDS.05-xxxx For the above code, an operation error is assumed. Upon checking thefollowing items and re-execute processing. If the error is not recovered,contact Acer | HDS.05-2500 or 05-2581 Is logical unit 0 defined?05-2600 In spite of none of drive mounted states, is ALL RAID specified and is alogical unit specified for ALL CAPA formatted?05-2580 Is an attempt made to define a logical unit exceeding the capacity of thedefined RAID group?0B-FD01 Switching a controller in charge of a logical unit occurred during formatting.Check the controller in charge and re-execute formatting from the controllerin charge.DMEA000006 or DMEA000007 Drive failure recovery or ShadowImage-In-System Replication, TrueCopySynchronous Remote Replication, and/or Copy-on-Write Snapshot may be inoperation. Check the status of the subsystem.