Aspire AX1430 Service Guide 21This chapter provides step-by-step instructions on how to disassemble and reassemble the computer formaintenance and troubleshooting purposes.Disassembly ToolsIn performing the disassembly process, you will need the following tools:• Wrist-grounding strap and conductive mat for preventing electrostatic discharge• Philips screwdriver• Flat screwdriverPre-disassembly ProcedureBefore proceeding with the disassembly procedure, perform the steps listed below:1. Make sure that the optical disc drive and the optional card reader slots are empty.2. Turn off the power to the computer and all peripherals.3. Unplug the power cord from the computer.4. Unplug the network cable and all connected peripheral devices from the computer.5. Place the computer on a flat, steady surface.NOTES • To reinstall the system components and assemble the unit, perform the disassembly procedures inreverse.• The screws for the different components vary in size. During the disassembly process, group thescrews with their corresponding components to avoid mismatches when putting back thecomponents.System Disassembly and ReassemblyChapter 3
