Acer Aspire M3201 User Manual

Also see for AcerSystem: User guide User guide User guide User guide User guide

Acer Aspire M3201 User Manual Manual pdf 15 page image

English5Frequently asked questionsThe following questions are possible situations that may arise during the useof your computer and each is followed by easy answers and solutions to thesituation.Q: I pressed the power switch but the system did not boot up.A: Check the LED located above the power switch.If the LED is not lit, no power is being applied to the system. Do any of thefollowing:• Check if the voltage selector switch located on the rear panel of thecomputer is set to the correct voltage.• Check if you plugged the power cable properly into an electrical outlet.• If you are using a power strip or AVR, make sure that it is plugged in andturned on.If the LED is lit, check the following:• Is a non-bootable (non-system) diskette in the floppy drive? If yes,remove or replace it with a system diskette and press Ctrl + Alt + Del torestart your computer.• The operating system files may be damaged or missing. Insert the start-up disk you created during Windows setup into the floppy drive andpress Ctrl + Alt + Del to restart your computer. This will automaticallydiagnose your system and make necessary fixes. However, if thediagnostic utility still reports a problem, then you may have to performthe recovery process to restore your system to its original default factorysettings.Note: For more information about recovering your system,refers to the RCD instruction sheet.Q: Nothing appears on the screen.A: Your computer's power management function automatically blanks thescreen to save power. Just press any key to turn the display back on.If pressing a key does not work, you can restart your computer. If restartingyour computer does not work, contact your dealer or the technical supportcenter for assistance.Q: The printer does not work.