Chapter 2 45PC Health StatusOn the main board that supports hardware monitoring, you can monitor the parameters of critical voltage,temperature and fan speed.CPU Shut Down TemperatureEnables you to set the maximum temperature that the system can reach before powering down.Delta Temp. (°C) [ 2]PWM Start SYS Temp. (°C) [ 42]Slope PWM Value 2 [ 2]Delta Temp. (°C) 2 [ 2]Slope PWM Value [ 2]Start PWM Value (0~127) [ 64]Slope PWM Value [ 3]Delta Temp. (°C) [ 2]PWM Start SYS Temp. (°C) [ 45]System Smart FAN Control [Enabled]PWM Start CPU Temp (°C) [ 45]Start PWM Value (0~127) [ 48]Phoenix - Award WorkstationBIOS CMOS Setup UtilityPC Health StatusCPU Shutdown Temperature [90°C/174°C] Help ItemCPU Vcore [1.34V]+3.3V [3.32V] Menu Level X+5V [5.08V]+12V [11.96V]+5VSB [4.94V]CPU FAN speed 1844 RPMSystem FAN speed 1790 RPMCPU Temperature 64°CAmbient Temperature 31°CCPU Temp. Offset [255]CPU Smart FAN Control [Enabled]PWM Start CPU Temp (°C) [ 35]CPU Warning Temperature [Disabled]Slope PWM Value 2 [ 3]Delta Temp. (°C) 2 [ 2]KLIJ :Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:ExitF1: General Help F5: Previous Values F7: Optimized Defaults
