Chapter 2 47Power Management SetupThe Power Management menu lets you configure your system to most effectively save energy while operatingin a manner consistent with your own style of computer use.Parameter Description OptionsPCI Express PM Function This item is for PCI Express power managementfunction.N/AACPI Function This item allows you to enable or disable the ACPIfunctionEnabledDisabledACPI Suspend Type This item specifies the power saving modes for ACPIfunction. S1(POS): The S1 sleep mode is a low powerstate. In this state, no system context (CPU or chipset)is lost and hardware maintains all system context. S3(STR): The S3 sleep mode is s power-down state inwhich power is supplied only to essential componentssuch as main memory and wake-capable devices andall system context is saved to main memory. Theinformation stored in memory will be used to restorethe PC to the previous state when an wake-up eventoccurs.S1 (POS) : Set ACPI suspendtype to S1/POS(Power OnSuspend).S3 (STR) : Set ACPI suspendtype to S3/STRRun VGABIOS if S3ResumeThis item determines whether or not to enable thesystem to run VGA BIOS when resuming from S3 (S4).Auto, Yes, NoSoft-Off by PWR-BTTN This item specifies how long you must press and holddown the power button before the system is shut down.Instant-off: Turns off the system instantly.Delay 4 Sec.: Turns off the system after a 4-seconddelay.Instant-offDelay 4 Sec.PWRON After PWR-Fail This item allows you to select if you want to power onthe system after power failure.Off, On and Former-StsWake-Up by PCI Card This items determines whether or not to wake up thesystem by PCI card.Enabled, DisabledX PCI Express PM Function [Press Enter]ACPI Function [Enabled]ACPI Suspend Type [S3(STR)]Run VGABIOS if S3 Resume [Auto]Soft-Off by PWR-BTTN [Instant-Off]PWRON After PWR-Fail [Former-Sts]Wake-Up by PCI Card [Disabled]Power on by Ring [Disabled]USB KB WakeUp From S3(S4) [Enabled]Resume by Alarm [Disabled]x Date(of Month) Alarm 0x Time(hh:mm:ss) Alarm 0 : 0 : 0F5:Previous Values F7:Default SettingsKLIJ :Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General HelpPheonix - AwardBIOS CMOS Setup UtilityPower Management SetupItem HelpMenu Level X