80English BIOS utilityThe BIOS utility is a hardware configuration program built into yourcomputer's BIOS.Your computer is already properly configured and optimized, and you do notneed to run this utility. However, if you encounter configuration problems, youmay need to run it.To activate the BIOS utility, press during the POST; while the notebook PClogo is being displayed.Boot sequenceTo set the boot sequence in the BIOS utility, activate the BIOS utility, then selectBoot from the categories listed at the top of the screen.Enable disk-to-disk recoveryTo enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,then select Main from the categories listed at the top of the screen. Find D2DRecovery at the bottom of the screen and use the and keys to set thisvalue to Enabled.PasswordTo set a password on boot, activate the BIOS utility, then select Security fromthe categories listed at the top of the screen. Find Password on boot: and usethe and keys to enable this feature.
