Machine Maintenance Procedures 3-5Machine Maintenance ProceduresIntroduction 0This chapter contains general information about the computer, a list of tools needed todo the required maintenance and step by step procedures on how to remove and installcomponents from the computer.General Information 0The product previews seen in the following procedures may not represent the finalproduct color or configuration. Cable paths and positioning may also differ from theactual model. During the removal and installation of components, make sure allavailable cable channels and clips are used and that the cables are installed in the sameposition.All prerequisites must be completed prior to starting maintenance.Recommended Equipment 0The following equipment are recommended to do the following maintenanceprocedures:Wrist grounding strap and conductive matFlat screwdriverPhilips screwdriverPlastic tweezersFlat plastic pryTable 3-1. Screw ListSize Quantity Acer Part No.M2.5*6.0 24 MM25060IL69M2.5*3.5 6 MM25035ICI4M2.0*3.0 18 MS20030ILX1M2.5*4.0 6 MM25040IL60M2.0*5.0 4 MS20050I028M3.0*3.5 2 MS30035I354
