Altos G540 Installation Configuration Guide 18Device Version EasyBUILD VersionSAS daughter board 1.27.03.00 EasyBUILD 8.0 build 200 (or later)Chipset 8.6.0.1002 EasyBUILD 8.0 build 200 (or later)Onboard GigabitEthernet 9.12.17.0 EasyBUILD 8.0 build 200 (or later)Onboard VGA 8.240.50.3000 EasyBUILD 8.0 build 200 (or later)IOAT 1.2.79.9 EasyBUILD 8.0 build 200 (or later)Software RequiredFor Windows Server 2008 Installation, the following manage utilities arerequired.Software Version EasyBUILD VersionMegaRAID StorageManager 2.63-00 EasyBUILD 8.0 build 200 (or later)Intel PROSet Utility 13.0.44.0 EasyBUILD 8.0 build 200 (or later)Configuring SAS Daughter BoardPlease refer to the Appendix B. for the SAS daughter board integrated mirrorconfiguration.Installation Tips1. Though Windows Server 2008 can recognize the SAS daughter board, westill replace the driver with the one in EasyBUILD. Please copy SASdaughter board driver from the EasyBUILD 8.0 build 200 to a floppy orUSB flash first before the installation.2. Please boot the system form the Windows Server 2008 DVD. Follow theinstructions to do the installation.3. When you see the “Where do you want to install Windows?” on thescreen, please insert the floppy diskette or USB flash with SAS daughterboard driver and click on Load Driver.4. Click on Browser and select directory of the floppy or USB flash thatcontains the driver.5. Click on OK. You will see the supported devices listed.6. Select “LSI Adapter, SAS 3000 series, 8-port with 1068 -StorPort(A:\lsi_sas.inf)” and click on Next.7. After the driver is loaded and returned to “Where do you want to installWindows?” page, click on Drive options (advanced) to create a partitionfor installation.8. After the partition created, click on Next to continue the installation andfollow the instructions to finish the installation.
