34 Chapter 2Primary/Secondary/Third/Fourth IDE Master/SlaveThese items let you select the IDE hard disk parameters that the system supports.Parameter Description OptionDevice Display detected device infoVendor Display IDE device vendorSize Display IDE DISK sizeType Driver Type Not InstalledAutoCD-ROMARMDLBA/Large Mode Selects the hard disk drive translation method.For drivers with more than 504MB, the LBA modeis necessary.DisabledAutoBlock (Multi-Sector Transfer) Mode Enhances disk performance depending on thehard disk in use. If you set this parameter to Auto,BIOS setup automatically detects if the installedhard disk drive supports the Block Mode function.If supported, it allows data transfer in blocks(multiple sectors) at a rate of 256 bytes per cycle.If you set this parameter to Disabled, data transferfrom and to the device occurs one sector at atime.DisabledAuto
