Acer AcerPower FV User Manual

Also see for AcerPower FV: Service guide

Contents

Acer AcerPower FV User Manual Manual pdf 13 page image

9EnglishTroubleshootingThe following questions are possible situations that may arise duringthe use of your computer, and each is followed by simple answers andsolutions to the situation.Q: I pressed the power switch but the system did not boot up.A: Check the LED located above the power switch.If the LED is not lit, no power is being applied to the system. Do any ofthe following:• Check if the voltage selector switch located on the rear panel ofthe computer is set to the correct voltage.• Check if you properly plugged the power cable into anelectrical outlet.• If you are using a power strip or AVR, make sure it is plugged inand turned on.If the LED is lit, check the following:• Is a non-bootable (non-system) floppy disc in the floppy drive? Ifyes, remove or replace it with a system floppy disc and press Ctrl +Alt + Del to restart your computer.Q: Nothing appears on the screen.A: Your computer's power management function automaticallyblanks the screen to save power. Press any key to turn the displayback on.If pressing a key does not work, restart your computer. If restartingyour computer does not work, contact your dealer or the technicalsupport centre for assistance.Q: The printer does not work.A: Do the following:• Make sure the printer is connected to a power outlet and that it isturned on.• Make sure the printer cable is connected securely to the system'sparallel port and the corresponding port on the printer.• For additional information concerning the printer, refer to theprinter's documentation.