|
Appendix A Server management tools968 Now that the RAID volume is created, you can press or selectoption 5. Exit to exit.Assigning Hot Spare driveThe Intel onboard SATA RAID Configuration Utility in POST does notprovide the function to assign a hot spare driver. Please assign a hotspare driver with Intel onboard SATA RAID utility installed in theoperating system.Adaptec onboard SATA RAID CreationConfiguring Adaptec onboard SATA RAIDThis section explains briefly how to create a RAID volume with theAdaptec onboard SATA RAID.Enabling the Adaptec onboard SATA RAID controller1 Turn on the server and the display monitor. If the server is alreadyturned on, please close all open applications and then restart theserver.2 During POST, press to access the BIOS Setup Utility.3 Select the Advanced > IDE/SATA Configuration submenu.4 Change the setting of the Configure SATA#1 as field from IDE toRAID.5 Select Adaptec of ICH Raid CodeBase option.6 Press .7 Select Ok to save the setting and close the Setup Utility.Entering Adaptec onboard SATA RAID Configuration UtilityTo start the Adaptec onboard SATA RAID Configuration Utility, pleasepress + when you see the RAID BIOS during POST. AfterPOST finished, the Adaptec RAID Configuration Utility will display onthe screen.Creating RAID Volume1 Select the Array Configuration Utility option.2 Select Create Array.3 The screen displays Select drives to create Array.
|
