81Serial Port ConfigurationS.M.A.R.T. Self-Monitoring Analysis and ReportingTechnology (SMART) can help predictimpending drive failures. Select Auto toallow the AMI BIOS to automaticallydetect hard disk drive support. SelectDisabled to prevent the AMI BIOS fromusing S.M.A.R.T. Select Enabled to allowthe AMI BIOS to use S.M.A.R.T. tosupport the hard-drive disk.Auto,Disabled,Enabled,32Bit DataTransferSelect Enable to enable the function of32-bit IDE data transfer.EnabledDisabledIDE DetectTimeout (sec)Use this feature to set the timeout valuefor the BIOS to detect the ATA, ATAPIdevices installed in the system.0 (sec), 5,10, 15, 20,25, 30, 35Parameter Description OptionsSerial Port 1AddressThis feature allows the user tospecify the base I/O port address andthe Interrupt Request address forSerial Port 1 or Serial Port 2. SelectDisabled to prevent the serial portfrom accessing system resources.When this option is set to Disabled,the serial port will becomephysically unavailable. Select 3F8/IRQ4 to allow the serial port to use3F8 as its I/O port address and IRQ 4for the interrupt address.Disabled,3F8/IRQ4,3E8/IRQ4,2E8/IRQ3,2F8/IRQ3Serial Port 2AddressDisabled,2F8/IRQ3,3E8/IRQ4,2E8/IRQ3,3F8/IRQ4Serial Port 2AttributeSelect COM to configure theonboard COM 2 port as a normalserial port. Select SOL (SerialOver_LAN) to confi gure theonboard COM 2 port as a virtualCOM port for SOL use.SOLCOMParameter Description Options
