Acer AT2601W User Manual

To connect a camera or camcorder, use the Video/Audio ports located on the bottom of the TV set. Follow the instructions provided in the manual for the specific connections.

To navigate the OSD, use the remote control to access and adjust various settings and features as outlined in the 'OSD Navigation' section of the manual.

The Acer AT2601W offers 4 different Picture-In-Picture modes, allowing you to simultaneously preview multiple programs.

The Acer AT2601W has a wide display with a resolution of 1280x768, making it HDTV ready.

To change the input source, press the 'INPUT' button on the front panel. This will allow you to select the desired source.

To turn the TV on or off, press the Power button.

To mute the sound, press the MUTE button once. Press it again to restore the sound.

You can switch between different input sources using the buttons labeled 'TV', 'AV', 'SCART', and 'VGA/HDMI'. These buttons allow you to select the desired input source for your display.

For advanced HDMI settings, refer to the User Manual of your AV equipment. The Acer AT2601W TV connects to these devices via the HDMI port on the bottom of the TV.

You can change the channel by pressing the number keys on the remote control. The channel will change after 2 seconds. Alternatively, you can press and hold the Channel Up/Down button on the remote control to increase or decrease the channel number. Pressing the ENTER button will select the channel immediately.