44SATA Controller ConfigurationParameter Description OptionSATA Controller When enabled, the SATA controller willfunction normally.EnabledDisabledSATA Mode Select the on chip SATA type.IDE: When set to IDE, the SATA controllerdisables its RAID and AHCI functions andruns in the IDE emulation mode. This is notallowed to access RAID setup utility.RAID: When set to RAID, the SATA controllerenables both its RAID and AHCI functions.You will be allows access the RAID setuputility at boot time.ACHI: When set to AHCI, the SATA controllerenables its AHCI functionality. Then the RAIDfunction is disabled and cannot be accessthe RAID setup utility at boot time.IDERAIDACHISATA Port 0/1/2/3/4/5 Displays the installed HDD devices.
