Machine Maintenance Procedures 3-31Bluetooth Module Removal 0Prerequisite:Upper Cover Removal1. Locate Bluetooth module (B) on upper cover. Refer to Figure 3-25.2. Lift module (A) from adhesive strip on upper cover as shown in Figure 3-27.3. Disconnect module cable (B) from module (A).Figure 3-27. Bluetooth ModuleBluetooth Module Installation 01. Connect module cable (B) to module (A). Refer to Figure 3-27.2. Install and secure module (A) to adhesive strip on upper cover.3. Install upper cover.AABB
