Acer AC511 Reference Manual

Also see for AC511 SERIES: Service guide Service guide

Contents

Acer AC511 Reference Manual Manual pdf 3 page image

41A604-786-2A 英文 3INSTALLATION INSTRUCTIONSSwivel BaseTo attach the swivel base to the monitor, do the following:• Carefully turn the monitor on its side or upside down. ( see figure 1 )• Locate the cavities at the bottom front of the monitor.• Insert the pegs on the swivel base into these cavities. Push the swivel baseforward until the swivel base locks in place.• To remove the swivel base, hold the bottom of the swivel base, then pushit out.Install RemoveFigure 1 Installing and Removing the Swivel BasePower CordPower Source:1. Make sure the power cord is the correct type that required in your area.2. This monitor has a universal power supply that allows operation in either100/120V AC or 220/240V AC voltage area ( No user adjustment isrequired. )3. Connect the power cord into your monitor’s power input socket, and thenplug the other end into a 3-pin AC power outlet. The power cord maybe connected to either a wall power outlet or the power outlet socket onyour PC, depending on the type of power cord supplied with yourmonitor.