Menu
Ace Energy ACE-BC004 User Manual
      |
4• When the battery is fully charged (14.4V +/- 0.25V), LED 10 lights up. The device automatically switches tomaintenance charging.Mode 3: 6V Motorcycle mode (7.2 V +/- 0.25 V)• This mode is intended especially for 6V batteries with a capacity below 24Ah, e.g. for 6V motorcycle batteries.• To select this mode, press the MODE button (12) until LED 3 lights up. The charging process starts automatically(1A+/-10%), LED 3 is lit.• When the battery is fully charged (7.2V +/- 0.25 V), LED 10 lights up. The device automatically switches tomaintenance charging.Mode 4: 12V Motorcycle mode (14.4 V +/- 0.25 V)• This mode is intended especially for 12V batteries with a capacity below 24Ah, e.g. for 12V motorcycle batteries.• To select this mode, press the MODE button (12) until LED 4 lights up. The charging process starts automatically(1A+/-10%), LED 4 is lit.• When the battery is fully charged (14.4V +/- 0.25 V), LED 10 lights up. The device automatically switches tomaintenance charging.Mode 5: Lithium mode (14.4 V +/- 0.25 V)• This mode is intended especially for 12V Lithium batteries (LiFePO4).• To select this mode, press the MODE button (12) until LED 1 & 2 lights up. The charging process starts automatically(4.5A+/-10%), LED 1 & 2 is lit.• When the battery is fully charged (14.4V +/- 0.25 V), LED 10 lights up. The device automatically switches tomaintenance charging.Regeneration function:This function is designed to regenerate deep-discharged batteries. It cannot be directly selected.If a deep discharged rechargeable battery is connected to the charger, the regeneration mode is the first mode to start. Lowcharging current are used to try and bring the deep discharged rechargeable battery to a normal battery voltage again. When thebattery reaches a normal voltage, the charger will continue charging using the regular process.Defective rechargeable batteriesThe charger recognises defective rechargeable batteries automatically. In this case the selected charging programme will not bestarted. LED 7 is lit.MODE SELECTPress the MODE button (12) to activate or deactivate the selected mode.CLEANINGDisconnect the battery charger from the battery and the mains voltage before cleaning it.Clean the outside of the product with a clean, dry, and soft cloth.Do not use aggressive cleaning agents to avoid discolouration.SPECIFICATIONSOperating voltage: 100-240V~ 50/60 HzCharge end voltage: 7.2V or 14.4 V or 14.7 (+/- 0.25V)Charging current: 4.5A +/- 10% (AGM, Flooded & Lithium mode)1A +/- 10% (6V & 12V motorcycle mode)Rechargeable battery type: Any 6V or 12V lead-acid batteries (SLA batteries, AGM, gel)12V Lithium batteries (LiFePO4)Battery charge capacity: 1.2 - 120AhBattery maintenance capacity: 1.2 – 150AhProtection type: IP65 (casing)1USER MANUALACE-BC0046V / 12V 4.5AAUTOMATIC CHARGER--------------------------------------------------------------------------------------------------------------------------OPERATING INSTRUCTIONS ENIntelligent Battery ChargerINTENDED USEThe product is designed to charge and maintain 6 or 12-V lead-acid and Lithium batteries with a capacity of 1.2Ah - 120 Ah. Thecharger has been optimised to maintain the battery of your motorcycle or car when it is not being used over longer periods oftime, for example over the winter. The charger is designed to charge Lithium, Gel, AGM, and standard lead-acid batteries.Any use other than that described above will damage this product and involves the risk of short circuits, fire, electric shock, etc.PACKAGE CONTENTS• Battery charger• Operating instructions• Cable with battery clamps• Cable with o-ring connectors• Cable with cigarette lighter plugSAFETY INSTRUCTIONSPlease read through the operating instructions completely before operating the device. They contain importantinformation for correct operation. The warranty/guarantee will be void if damage is incurred resulting fromnon-compliance with these operating instructions! We assume no liability for any consequential damage! We do notassume any liability for damage to property or personal injury caused by improper use or the failure to observe thesafety instructions!General• The unauthorized conversion and/or modification of the product is inadmissible for safety and approval reasons (CE).• The battery charger may only be operated with a supply voltage of 100-240 V~/50/60 Hz.• The product is not a toy. It is not suitable for children. Pay particular attention when children are present!• The product may only be set up, used or stored in places that are not accessible to children. Danger to life!• This product is only suitable for charging 6 and 12V lead-acid batteries or 12V Lithium. Never use it to charge differentrechargeable batteries (e.g. NiCd, NiMH) or even normal batteries! There is a risk of fire and explosion!• Maintenance, adjustments and repair work may only be carried out by a specialist/specialised workshop. Only use originalspare parts to repair the device. Using other spare parts can lead to significant material damage or personal injury!• Do not leave packaging material lying around carelessly. It might become a dangerous toy for children!• If you notice any damage, do not use the battery charger anymore.Operation• Operation under adverse ambient conditions must be avoided under all circumstances. Adverse ambient conditionsinclude: ambient temperatures above 40 °C, flammable gases, solvents, vapours, dust, and relative humidity above 80 %.• Do not use the battery charger inside a vehicle. The battery charger must not be used in the vicinity of flammablesubstances or gases.www.ace-electronique.com |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved