2. PreparationUser Guide Page 1-21.1.2 A12T3-Share features1. Hardware Specifications Thunderbolt 3 (40Gb/s) x4 and PCIe (QSFP) port x1 Support 12 x 3.5”/2.5” SAS/SATA drive and SSD Hardware XOR/Multi-Parity engine 2GB DDRIII memory, ECC-protected 400W power module, Single/Redundant (optional)2. Software Specifications Support T-Pairing to bind dual Thunderbolt paths, increasing 2 timesperformance Support T-Share Expansion to expand host port to 8 and drive number to 96. Multiple RAID levels: 0,1,5,6, 0+1 and enhance JBOD Up to 5 disk array groups Selective initialization method (on-the-fly and performance evaluation) Online RAID set expansion and level migration Support write-back and write-through caching of controller and drive Automatic rebuilding Disk RW Test to measure the real IO throughput on each disk Disk health monitoring by S.M.A.R.T. Array roaming and disk traveling Dual firmware images for firmware recovery Disk Lag Proof technology to guarantee disk timely response Equalization mode to smooth the performance of sequential data transfers3. Management Java based GUI-RAIDGuardX, centralized multiple RAID system management LED indicator to monitor status of RAID enclosure Event notification by email (SMTP) Support SNMP traps4. Enclosure Dimensions: L: 369mm, W:175mm, H: 394.6mm Weight: 15.2 Kg, 33.5 lbs (w/o drives)5. Support OS Windows: 10 32bit / 64bit and later Mac OS X:10.12.x6. Operating Conditions Humidity: 5% - 85% Operating Temperature: 0°C– 40°C7. Certification RoHS, CE, FCC, BSMI