Menu
Accurate Technology IPcam-SD User Manual
            | |
Manual Part # 800-1342-001 Rev 112012 Page 5 of 12IntroductionThe ProRF SPC Transmitter was designed to be used in conjunction withProScale® measuring systems and the ProRF Receiver.The purpose of this system is to provide a two-way wireless communicationchannel between any ProScale Digital Readout with a 10 pin SPC output and acomputer or other device having an RS232 or USB communication port..ProRF SPC Transmitter features 2 LEDs provide RF message status and low battery reporting. Operates from a single lithium coin cell battery. 3 to 6+ months battery lifetime depending on usage. Small, compact enclosure designed to plug into ProScale DigitalReadouts (DROs) that are equipped with an SPC data port.NOTE: This Transmitter is compatible with ProRF Receiver part # 700-1038-001. It CAN NOT be used with ProScale Receiver part # 700-1036-0xx (withexternal antenna)SpecificationsSize: .8 x 1.4 x 2.6 inches (W x L x H)Power: CR2450 (or equivalent) lithium batteryInput: ProScale Readout 10 pin SPC output.Output: RF signal to ProRF receiver# of Inputs: 1# of RF Channels: 15Range: 50’ to 100’ depending on the environmentCommunication: 2-wayFrequency: 2.4 GHz (802.15.4) |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved