10Pan, Tilt and Zoom Dome Camera / ACD-1500-HT35 Wall Mount Installation using Outdoor Housing Assembly1) Attach the Wall Mount Bracket to the wall.Make sure the wall can support the weight andvibration of the camera and housing.2) Remove thumb screw holding access cover inplace on Mounting Arm.3) Route the wiring through the inside of the armand out the access hole.4) Assemble and screw the Outdoor HousingAssembly on the Mount Bracket while routingthe wiring from the camera through the neck ofthe bracket and out the access hole.Continue to page 11System InstallationINSTALLATION 3INSTALLATIONINSTALLATIONInstallation