Acclaim Lighting Dyna Accent User Manual

Contents

Acclaim Lighting Dyna Accent User Manual Manual pdf 19 page image

17www.acclaimlighting.comFURTHER INFORMATIONTROUBLESHOOTINGNO LIGHT OUTPUT IS VISIBLE WHEN EXPECTED.• Check that power is correctly applied to the fixture and that there is no damage to thepower input cord.• Use an RDM tool to perform an emitter test.• Check that the DMX address set within the fixture matches that being output by thecontrolling source device.• If wired DMX control is being used, check the DMX output near to the source to confirm avalid signal is being originated.• If wired DMX control is being used, check that the DMX + (hot) and DMX - (cold) lineshave not been crossed.• If Aria wireless DMX control is being used, check that the fixture is set to the same wirelessaddress as the transmitter (the wireless address is independent of the DMX address). Trychanging the transmitter and receiving fixture(s) to different (but equal) wireless channelsto check for clear space in the radio spectrum from interference by other devices, such asWiFi.DIMMING AND/OR CHASE CHANGES ARE JERKY WHEN USING ARIA.• Check for WiFi sources near to the transmitter or receiver devices. Try changing thetransmitter and receiving fixture(s) to different (but equal) wireless addresses to check forclear space in the radio spectrum from interference by other devices.