Menu
Access Lighting 20785LED Installation Instructions Manual
   |
IMPORTANTBefore assembling your access lighting fixture, please make sure thatyou carefully read through these instruction sheets. Consider havingyour fixture installed by a qualified licensed electrician.NOTE: The important safeguards and instructions that appear in thismanual are not meant to cover all possible conditions and situationsthat may occur. It must be understood that common sense, caution andcare, are factors that can’t be built into any product. These factors mustbe supplied by the person(s) caring for and operating the fixture.STEP BY STEP INSTRUCTIONSBefore starting your installation disconnect the Power by turning off theCircuit Breaker or by removing the fuse at the fuse box. Just turning thelight off at the light switch is not sufficient to prevent electrical shock.PREPARE FIXTURE AND MOUNTCROSSBAR PLATEIf there is an existing fixture remove it.Expose the supply wires from the J-box.Mount the crossbar plate to the J-box with the suppliedscrews.1GENERAL INFORMATIONAll electrical connections must be in accordance with all ordinances,Local and National Electrical Codes. These fixtures are intended formounting to a standard 4” x 2 1/2”metal octagon outlet box. The boxmust be directly supported by the building structure and U.L. Recognized.WHAT YOU NEED• Screwdriver• Wire Cutters• Wiring Supplies as Specifiedby Electrical CodeINSTALLATION INSTRUCTIONSWHAT WE PROVIDE• Mounting Hardware• Crossbar Plate• Gasket• LEDCOLLECTION1CERTIFICATION: ETL WET NO. 20785LED20785LEDAPPLICATION MODEL NO.OUTDOORGUARDIAN |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved