TRK2XX Initiation Manual18The parameters to set are the following ones: Sending types: used to set the between all the possible technologies that the TRK2XX has:NB-IOT, LTE-M and GPRS or a combination of them. MCC and MNC: this values are provided by the operator. In the next firmware versions itwill be possible to set it to automatic. NBIOT IP: is the IP address of Inmolecular platform, have to be 35.195.70.23 NBIOT port: is the listen port of Inmolecular platform have to be 44301 NBIOT band, GSM band and LTE-M: the device have multiple bands to operate dependingon the operator infrastructure. Please, contact with your network operator to know exactbands operation for your TRK. Multiple choices could be used, but we recommend to onlythe ones that your SIM card allows. APN configuration: contact your network operator / SIM card provider to know your APNconfiguration.With all the parameters in place, the TRK will report information to Inmolecular platform. Toidentify the TRK inside your Inmolecular dashboard, please check the QR code on the bottomof your TRK device.Figure 10 - QR code and Inmolecular platform TRK serial number matching15. TRK2XX advanced configurationTRK2XX series advanced configuration depends on the firmware version. Please refer toTRK2XX Advanced configuration manual.16.Accent Systems SupportContact support@accent-systems.com