Menu
Acard ARS-2030L User Manual
Also see for ARS-2030L: User manual
                                                                        | |
Contents
| 
65ARS-2030L/2032 Manual6.5 About CD Writer Not ReadableAfter copying if the CD writer is not readable, please use Compare to examine, orget another CD-ROM to test.6.6 About High Failure RateIf the failure rate of copying is high, please do the following things to improve.l Lower the speed of CD writer.l Inspect if the blank disk’s quality is bad.l Update the firmware.l Inspect the CD writer’s maximum writing speed. If the speed is over 24X,copy the data to a hard disk first, and then transmit to CD.6.7 About Firmware UpdateIf you cannot update the firmware, please inspect the BIOS program. Perhaps youhave downloaded a wrong program, or let a zipped file be written into CD. Thezipped file should be unzipped first.Failure in firmware update may cause the copy smart plus to fail in booting. Underthe circumstances, please return the control board to ACARD for repair.6.8 About Function 12 and CancellationIf you want to execute function 12 Advanced Setup, you can press ESC for 2 seconds.And during operation if you want to cancel a function like Copy, Test, Verify and soon, you can press ESC for 2 seconds, too. |
Related manuals for Acard ARS-2030L
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved