26English7. Remote access via appThis 7" touch screen wireless monitor gives you the option of switching live to your cameras.The app for this device can be found in the App Store under the name of “TVAC16000”.If you want to access the live picture when you are out and about, proceed as follows: Network connectionMake sure that the monitor is in the docking station, the mount isconnected to the internet, the connection to the internet is establishedand you have made all the relevant network settings at 6.4.3 andon your router. “TVAC16000” appDownload the “TVAC16000” app and install it on your smartphone. Adding the systemOpen the app on your mobile phone and click on the symbol toadd your TVAC16000 system. Entering system information1. Enter a name for your system at “System Name” which should thenbe displayed on your mobile phone.2. Now enter the 15 digit DID number.This you can find in your monitor's network information on thelabel stuck on the product or click on “Search” and all the devicesin the near vicinity are displayed.3. Then enter your password.The password is the security code which you can also find in yourmonitor's network information.If you have not changed your password on the monitor, this will bethe default password: 123456.4. Save the settings with “Save” and “Yes”.Once you change your password in the monitor, you also have tochange it here; otherwise you will not be able to access thecameras.