Abus PPIC32020 User Manual

Also see for PPIC35520: Quick guide Quick guide

Abus PPIC32020 User Manual Manual pdf 11 page image

11English4. Mounting / installationIMPORTANT!The camera must be disconnected from the power supply during installation.4.1. PPIC32020Position the mount where you intend to install the camera. Mark up and drill the required holes.Next, use the screw anchors and screws provided to fasten the mount in place.Attention!Make sure the alignment is correct. The 'LOCK' text must point in the direction of thescene to be monitored.Use the small screws provided to fasten the base plate to the camera.Position the camera with the base plate on the mount in such a way that the arrow on the base plate isaligned with 'UNLOCK' on the mount. Next, fix the camera in place by turning the camera clockwise.The arrow must be aligned with 'LOCK'.4.2. PPIC32520If the camera is being installed on a roughcast wall, use the EVA foam provided and glue it to the backof the mount.First of all, disconnect the mount from the camera using the Allen key provided. Position the mountwhere you intend to install the camera. Mark up and drill the required holes. Insert the screw anchorsprovided.Reconnect the camera to the mount and feed the cable through the mount. Next, screw the cameraand mount to the wall.