Abus PLMK10000 Manual

Contents

Abus PLMK10000 Manual Manual pdf 26 page image

13English4. Technical dataparameter PLMK10000Dimensions (W x H x D) sensor: 195 x 15 x 2.98 mmmagnet: 20 x 10 x 0.7 mmweight 16 goperating temperature -20 – 60°Cradio frequency 868.4 MHz (Z-Wave PLUS, Europe)modulation FSK (BFSK/GFSK)Transmission power: < 4.5 dbpower supply 3 V DCbattery type Battery pack (LiMnO2)battery life 10 years (based on 1 x wake-up/day and 40 openingtriggers)Sabotage Protection Yes - (once wake-up is performed manually on thedevice)Firmware updateable noZ-Wave Beaming supported NoSmartStart supports NoZ-Wave Plus supports YesZ-Wave Network Security YesZ-Wave AES-128 Security (S0) NoZ-Wave S2 Security Yes (S2 Authenticated & S2 Unauthenticated)Z-Wave Chip Generation 500Z-Wave Sensor Type Binary SensorZwave library type Routing SlaveDevice Type / Role type Notification sensor /Reporting sleeping slaveZ-Wave DevKit Version 6.81.03Default wake-up interval 24 hours4.1. Additional remarks:Basic Command Class V1 - Basic Get\Report\Set value is mapped to Notification Status(Enable\Disabled) of the Notification Command Class.- Basic Set = Enable/disable the unsolicited transmission of all types of Notification Reports via theAssociation groups.- Basic Get = Query the unsolicited transmission status of Notification Reports via the Associationgroups.- Basic Report = Advertises the unsolicited transmission status of Notification Reports via theAssociation groups. Reports 0xFF (enabled) if at least one Notification Type status is enabled.

/ 26

Related manuals for Abus PLMK10000