Abus Eycasa CASA30100 User Manual

Also see for Eycasa CASA30100: User guide

Abus Eycasa CASA30100 User Manual Manual pdf 24 page image

24EnglishVideo signal failure: Shows the time of a failed signal connection between themain unit and camera. This message appears when the wireless signal fails forlonger than 1 minute.Battery strength: Shows the time of weak battery strength on an Eycasa videodoor station. When the battery is low, the video door station automaticallyswitches off video transmission. Change the batteries promptly if this messageappears.7.3.1 Doorbell eventSequence of doorbell ringing:1. Doorbell is pressed on the video door station.2. The screen on the Eycasa main unit is activated.3. RELAY2 on the door station is switched for 2 seconds to activate the door bell.4. The live image of the video door station is displayed.5. The doorbell tone plays.6. The event message is displayed on the screen.Possible user actions EffectAcknowledge the event message The doorbell ringing is interrupted.After the event message is acknowledged, the andbuttons can be pressed.Press the buttonThe event message is acknowledged and the doorbell ringingends.An active voice connection for the video door station isestablished and maintained for up to 60 seconds.Press the button The event message is acknowledged and the doorbell ringingends.Press the door opener (RELAY 1) on the video door station.No response Doorbell ringing stops after 30 seconds.Video connection is disconnected after 30 seconds unless“Camera permanently active” has been selected.The “Missed Door Bell” event message is saved on the mainunit.