Menu
Abode RF User Manual
     |
1. Function Button/LED Indicator• Press and hold for 10 seconds to enter the pairing mode when learning it into the gateway.• LED flashes once: When the button is pressed• LED continuous flash: The Siren is under pairing mode or the system is in the alarming modeabode Indoor Siren (abode RF)Siren - User Guide1IntroductionThe abode indoor siren is AC Powered with a rechargeable battery. It is capable of sounding its 95dB sirenwhen the abode alarm system is activated. It can be plugged into any indoor AC power outlet.2. Alarm Volume and entry exit beep sounds (Refer to page 4 & 5)• Alarm siren volume: Is not adjustable• Entry / Exit / Arm / Home Arm / Disarm (These Sounds (Beeps) are defaulted to OFF. Usercontrollable from web app, under the account tab on the left / system settings.3. AC Connect (Plug into local wall AC outlet)Power SupplyThe Siren is powered by AC power; plug the Siren into a power outlet to activate the Siren. The Siren willenter normal operation mode.Battery backupThere is a rechargeable battery inside the Siren that serves as a backup in case of a power failure. Duringnormal operation, AC power is used to power the Siren and at the same time recharge its battery.After AC power failure, the battery will provide power to the siren for 12 hours, then transmit a Low Batterysignal to the gateway and send notifications. After AC is restored and battery is fully recharged, the Siren willtransmit a low battery restored notification to the gateway.abode Systems Inc. Visit our support page for more information http://support.goabode.com/ 2016abode reserves the right to update this product information at any time without notice. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved