Abocom WR5201 Quick Installation Manual

Also see for WR5201: User guide

Contents

quick installation guide

Abocom WR5201 Quick Installation Manual Manual pdf 1 page image

111234567Notes81. One Wireless n/b/g Broadband Router.2. One Power Adapter.3. One Ethernet Network Cable.4. One Set-up CD-ROM with User Manual.5. One Quick Installation Guide.2233Application DiagramConnect the 802.11n b gWireless RouterRouter ConfigurationBefore you begin, ensure that the Wireless Router, theDSL/Cable modem supplied by your IP Provider, and PC areturned off.Connect your DSL/Cable Modem to the Internet port on theWireless Router using a standard RJ-45 Ethernet cable.Connect an Ethernet cable to one of the LAN ports on theWireless Router to the Ethernet port on your PC.Turn on the DSL/Cable modem first.Then turn on your Wireless Router.Turn on your PC.For Windows 2000 and XP users, your computer shouldobtain an IP address automatically from the WirelessRouter's DHCP server, after you've done the above steps.Check the LEDs:The Power, Internet, and WLAN LEDs should be ON.For each active LAN (PC) connection, the LAN ActivityLEDs (1-4) should be ON.Click Start Click Control Panel Network andInternet Connections (Right-click on) Local AreaConnection Properties.Make sure the box next to Internet Protocol (TCP/IP) ischecked. Click the Internet Protocol (TCP/IP) and clickthe Properties button.Select "Obtain an IP address automatically." Select"Obtain DNS server address automatically." Then clickOK to complete the PC configuration.Before setting up the Wireless Router, make sure your PCsare configured to "Obtain an IP (or TCP/IP) addressautomatically."802.11n/b/g WirelessBroadband Router Quick Installation GuideSubscribed lineTo PCsS b eA L CaD / leM do mExisting ConnectionPowerTo Internet

/ 2

Related manuals for Abocom WR5201