AbleNet LITTLE Step-by-Step Quick Start Manual

Also see for BIG Step-by-Step: Quick start guide Quick start guide

AbleNet LITTLE Step-by-Step Quick Start Manual Manual pdf 1 page image

Insert Batteries and Turn On2OnExit Record Mode5OFFRECORD SWITCH TOY/APPL.Record a Series of Messages4Choose your Switch Color1Quickstart Guide:BIG Step-by-Step™ and LITTLE Step-by-Step™communicatorswww.ablenetinc.comFirmly, rotate the colored switch top counter-clockwiseto remove. Attach a new color by rotating the capclockwise until it stops.A Snap Switch Cap is included with your BIG or LITTLEStep-by-Step. Place a picture or symbol on the switch top,and secure by snapping your Switch Cap over it.Connect one 9-volt battery at the bottom of the device.Rotate the Volume ON/OFF knob to turn the device on.The LITTLE Step-by-Step includes a detachable MountingBase that must be removed to access the battery door.Press the tab and slide to remove the base.OnPress and Hold the switch top, begin speaking when youhear a beep. Release when finished. Repeat foradditional messages in a sequence.Note: RECORD Light will flash while recording.Press and Release the RECORD button to exit RecordMode. Your BIG or LITTLE Step-by-Step is ready for use.NOTE: Depending on your model, your device will have either2 minutes or 4 minutes of recording time. The RECORD lightwill turn yellow and flash when only 10 seconds of recordingtime remains.Select Level / Enter Record Mode3Press and Hold,then ReleaseOFFRECORD SWITCH TOY/APPL.Select Desired level (applicable models) using the Levelswitch on the side of the device. Press and Hold theRECORD button until the RECORD Light activates, thenrelease.Press and ReleaseRepeatRepeatLITTLE/BIG Step-by-StepTMLITTLE/BIG Step-by-StepTM w/LevelsLevels switch(applicable models)*LITTLE Step-by-Step w/Levels shown