Abit IS7-G User Manual

Also see for IS7: User manual

Contents

Abit IS7-G User Manual Manual pdf 61 page image

BIOS Setup 3-73-3. Advanced BIOS FeaturesHyper-Threading TechnologyThis item is used to enable the functionality of the processor with Hyper-Threading Technology and willappear only when using such processor.The Hyper-Threading Technology helps your PC work more efficiently by maximizing processorresources and enabling a single processor to run two separate threads of software simultaneously,bringing forth greater performance and system responsiveness when running multiple applications atonce.Quick Power On Self Test:When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system.The BIOS shorten or skip some check during the POST.Hard Disk Boot Priority:This item selects the hard disks booting priority. By pressing key, you can enter its submenuwhere the hard disks detected can be selected for the booting sequence to boot up system.This item functions only when there is the option of [Hard Disk] in any one of the First/Second/ThirdBoot Device items. Bootable Add-in Device: (For IS7-G and IS7 only)This item allows you to select the add-in device among the [PCI Slot Device], [OnChip SATA], and[Onboard SATA] channel to serve as the bootable device listed in the item “Hard Disk Boot Priority”.NOTE: The option [Onboard SATA] appears only for the model with onboard Serial ATA controller. HDD Change Message:When set to [Enabled], a pop-up message will be displayed on the screen during the POST process if thehard drives installed in your system had been changed.User’s Manual