ASSEMBLY INSTRUCTIONS9STEP 5Insert the PEDAL SHAFT(5) through the tube located on the UPRIGHT(3). Slide the PEDAL CAPS(4)onto both ends of the PEDAL SHAFT(5) and secure with BUTTON HEAD BOLTS(M8x1.25x15mm)(14)and LARGE WASHERS(M8)(15). You need to use two Allen Wrenches to tighten the BUTTON HEADBOLTS(M8x1.25x15mm)(14) at both ends of the PEDAL SHAFT(5) at the same time.

Center Beam

Pedal Shaft

METER(

Handlebar

important information

Spring

Shock

Washer (M6)

Abilica 820 Rower Manual

820 Rower

Abilica 820 Rower Manual

Product

Learn More

Legal


Contents Center Beam Table Of Contents Pedal Shaft METER( Handlebar important information Spring Shock Washer (M6)	ASSEMBLY INSTRUCTIONS9STEP 5Insert the PEDAL SHAFT(5) through the tube located on the UPRIGHT(3). Slide the PEDAL CAPS(4)onto both ends of the PEDAL SHAFT(5) and secure with BUTTON HEAD BOLTS(M8x1.25x15mm)(14)and LARGE WASHERS(M8)(15). You need to use two Allen Wrenches to tighten the BUTTON HEADBOLTS(M8x1.25x15mm)(14) at both ends of the PEDAL SHAFT(5) at the same time. Previous Next / 36