www.abelko.seIMSEUltraBase30Welcome to Ultra!Power supplyUltraBase30 is powered by 24 V DC (NOTE! DC supply), through the terminalat the top right (marked +24V and GND)Note! Must be powered by astabilized DC power supply.Network connectionThe unit is connected to a fixed network by the Ethernet port, at the topleft. Factory default IP number is 10.0.48.94.Local PC is used only to connect the unit directly to a PC. It can be used toconfigure the regular network connection in the Ultra.Quick start guide

Abelko UltraBase30 Quick Start Manual

Introduction

Manual Version

Overview of the device

Menus

Menus limited view

Connect a PC directly to IMSE UltraBase

Overviews

Summaries

Parameters

Date

Weekly

Monthly

Yearly

Periodically

Alarms

Alarm Types

Alarm List

Alarm Sendouts

Logging data

Smart Log

Log Sendouts

Communication

Recipients

Modbus Slave Register

External devices sendouts

System

File Manager

Users

Settings

Backups

Create a new application backup

Front panel buttons for SD-card on UltraBase30

Update

Help

The unit UltraBase30

The unit UltraBase20

Term Definitions

UltraBase30

Abelko UltraBase30 Quick Start Manual

Product

Learn More

Legal