User Operations Guide—Mira Instant Replay Server202 Copyright ©2014, Abekas Incorporated Revised: 5 September 2014 Engineering Setup — VideoThe Video tab in the Mira Engineering Setup menu is used to configure the operational video format of the Mira server. IMPORTANT NOTE: All video channels in the Mira server must operate with the same video standard at any given time. It is not possible to operate one or more video channels with a different video standard from the other video channels.To open the Mira Engineering Setup window shown below, perform the procedure “Launching Mira Engineering Setup Utility” found on page 173 above.1. Click “Video” tab.2. Click radio button(s) for desired video standard andreference in which Mira will operate.3. Click (shown at right). The Restart Mira window appears: The next step will unload & reset ALL video channels!4. Click (shown above).5. Click in Restart Mira window. This will close the Restart Mira window.(Video Format parameters are described on next page)41235
