V53T GPS Full HD Car Camera Recorder User Manual122.2 Device Installation1、To attach the bracket to the device, slide the bracketinto the bracket slot until a click sound appears.2、To attach the device on the windshield, put the suctioncup onto the windshield and press down the clamp.3、Make sure the bracket has been firmly installed.4、To adjust the vertical angle, loosen the top knob; toswivel the device horizontally, unscrew the bottom knobscrew.5、Screw back tightly to secure recording angle.6、To disconnect the suction cup and the windshield, pulldown the clamp. Make sure the device is securely in yourhand in advance.7、To disconnect the bracket and the device, press on thepart on the bracket base that sticks out and push outwardwhile pulling the device inward as shown in theillustration.