Menu
Aban Technology HIGH SPEED DOME CAMERA User Manual
                                        | |
5Caution in UseDo not disassemble the unit and put alien substances in the unit.- Disassembling the unit or putting alien substances such as a metal can make thecamera defective.- Make sure of power switch-off before the installation.: Ensure power switch-off and check the voltage the camera before the installation.- Do not give the unit a shock and an operation.: Giving a strong shock or an excessive power on the button, terminal can causeproblem.This product has been designed and manufactured in accordance with the harmonizedEuropean standards, following the provisions of the below stated directives.Electromagnetic Compatibility Directive 89/336/EEC(EN60065:1998, EN61000-6-3:2001, EN61000-6-1:1997)This devise complies with part 15 of the FCC rules operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference and(2) This device must accept any interference received including interference thatmay cause undesired operationCaution :① Must use AC24V power source, current intensity must be less than 1.5A andmust use a double winding transformer② Never extend the power line from adaptor to camera.③ Please use more thick cable than 18AWG(1.0mm), if you want toextend the power line.④ You must use one adaptor per one camera that is being provided.⑤ Use extra power supplier, If you want to supply many piece ofcameras. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved