Aastra Venture IP Telephone System System Manual

Also see for VentureIP 480i: Release notes Administrator's guide Specifications Release note Administrator's guide

Contents

Aastra Venture IP Telephone System System Manual Manual pdf 17 page image

Model Venture IP 480i System Guide 15GatewaysDirect Inward Dialing (for Incoming Calls)You can assign a physical PSTN line to a telephone or a group of telephones.Incoming calls on this line will bypass Auto Attendant and will be forwardedto the specified telephone(s) immediately. If a line is assigned to a group oftelephones, all telephones will ring until one of them answers the call.If you are assigning a line to a group of telephones, please note that you haveto have the group already defined before proceeding. Please refer to GroupOptions on page 8 for further information.To assign a PSTN line or a telephone or a group:1. In System Options, navigate to Gateways and press Select.2. Navigate to the desired Gateway to which the PSTN line is connected(please note its MAC address).3. Press Select.4. Navigate to Lines and press Select.5. Navigate to the desired line. Line number is indicated on the back of theGateway to which you have connected that PSTN line.6. Navigate to Incoming and press Select.7. Press Change.8. The Corporate Directory is displayed. Navigate to the desired telephonenumber or the group name.9. Press Assign.10. Confirm the assignment by pressing Yes.