Operational Features41-001129-00 Rev 09, Release 1.4.1 5-15Operational FeaturesOperational FeaturesConfiguration ExampleThe following example illustrates the use of the "softkeyN states" parameter, andthe "softkeyN type" parameter with a value of empty. For clarity purposes, onlythe "softkeyN type" and "softkeyNstates" parameters are shown.softkey1 type: linesoftkey1 states: idle connectedsoftkey3 type: dndsoftkey3 states: idlesoftkey4 type: linesoftkey5 type: emptysoftkey5 states: connectedsoftkey6 type: speeddialsoftkey6 states: connectedThe following table shows how the keys in the example above would display onthe IP Phone UI.Softkeys and programmable keys are configurable using the Aastra Web UI or theconfiguration files.Note: The "empty" key type allows a softkey to be removed quickly bydeleting the softkey information from the configuration file.Softkey Idle Connected Notessoftkey1 Key 1 Key 2 Line displays for softkey1.Key 1 in connected state is the Drop key. Idleand connected display as applicable.softkey2 (not used) (not used) Softkey2 is not displayed.softkey3 Key 2 (not used) DND displays for softkey3. Idle displays asapplicable.softkey4 Key 3 Key 3 Line displays for softkey4. Default statevalues (idle, connected, incoming, outgoing)display as applicable.softkey5 (not used) Key 4 (blank) A blank displays for softkey5. Connecteddisplays as applicable.softkey6 (not used) Key 5 Speeddial displays for softkey6. Connecteddisplays as applicable.
