OpenPhone 71/73/75 System Telephones Display and MenuCards24For the System Administrator: Configuring the Display of the User Name andthe DateAssign the user name in the Configurator, User Manager: User menu. Configurethe display of the date in the info line of the system telephones on theOpenPhone 71/OpenPhone 73 in the Configurator, PBX Configuration: System:Settings menu.The OpenPhone 75’s display in call state:a Info linesDuring a call, the current charge counter (if configured) and annotation texts aredisplayed. During an enquiry call you will see the number of the enquiry call youdialled. On the OpenPhone 75 the second info line is used to display connectioninformation also, you can, for example, view the capacity status of a call queue.1.3.3 Key LinesThe display next to the keys is assigned to them on a line-by-line basis. Dependingon the type of key, the following display texts are shown. On the OpenPhone 71the display always shows the active line.Note: The call and seizure states are identified by additionalsymbols on the call keys. For details, refer to the section enti-tled Telephoning starting on page 37.ESC OKIncom..int..callOperator11:45Mon.01.Jan.06a
